Why is My Fridge Not Magnetic

Why is My Fridge Not Magnetic.

Today’s household fridge has become the hub of many a family’s communications and planning.

That’s no surprise – a fridge door provides a useful blank canvas for sticking all those reminders, rosters and bits of paperwork that we need to get us through the day.

The masalah is, your fridge is not magnetic, so as you stick on those oh so useful magnets, everything drops in an untidy pile to the floor!  It’s a pain and all your carefully laid plans to be organized are in a heap at your feet.  Let’s sort this out together.

WHY ISN’T STUFF STICKING TO MY FRIDGE?!

Without getting too ‘sciency’, let’s take a look at what’s going on.  The most common types of stainless steel used in fridges is austenitic, meaning it has a
high nickel content
– this makes the fridge door
non – magnetic.  So, there’s your problem right there.

Now, let’s see what you can do to get stuff stuck on that fridge and useful to you!

HANDY IDEAS FOR YOU TO TRY

  • If you’re set on using all those quirky and colorful magnets you’ve collected oper the years, you still can.  Simply take your
    magnets, put a bit of
    reusable putty
    on the back, and that’ll get them to stick.  Pop your piece of paper onto the putty, press the front of the besi sembrani ‘holder’ firmly to the fridge, and voila!
  • If using your magnets isn’ufuk important to you, you can simply use the
    putty on its own
    as a magnet replacement.
  • Magnetic message boards
    are fantastic products to use on your non – magnetic fridge because they’re mounted with suction cups or strong double sided tape.  Simply stick the board to the fridge, pressing the suction cups or tape firmly in place, and you have a magnetic surface ready to use.

You can find a range of magnetic boards in different sizes at large retailers like Lowe’s or at online retailers like Amazon.com.

  • If the front of your fridge isn’cakrawala magnetic, try other parts of the fridge.  Often the
    sides of the fridge
    are made out of different metals to the front, so they may be magnetic and able to hold all your magnets and bits and pieces of paper.
  • If you have paintable cabinets in your kitchen near your fridge, consider painting them with
    magnetic primer
    before finishing with a coat of latex paint.  The cabinets once magnetized provide another handy surface for keeping things.
Magnetic primers can be easy fixes to a non-magnetic fridge.

  • Make your own
    corkboard
    – buy yourself a lightweight picture frame and a piece of corkboard.

    • Most hardware stores will carry these materials.  Cut the corkboard (or have the store cut to fit for you) to fit inside the picture frame, and glue the frame down onto it.
    • Make sure that your frame is open in the front without glass or plastic sheeting!
    • Now put some
      reusable putty
      in the corners and middle of the back of your board, and press firmly to stick it onto the fridge – you can measure where you want it and make very light and easily removable placement marks by using a dry erase marker.
    • Whatever you do, don’t use permanent marker!  It will be MUCH harder to remove and could damage the finish of your appliance.
Read:  Are Top Entry Litter Boxes Good for Cats

Once your board is neatly placed to your liking, you can use simple
push pins
to secure items to the corkboard.  Items like push pins, corkboard etc. can be easily found at your local stationery store if your hardware store doesn’t carry them.

  • For lighter items, like single pieces of paper, you can use
    double sided tape
    on the fridge.

    • Check the package instructions to ensure that it’s the right kind of tape for stainless steel.
    • The tape shouldn’ufuk leave any sticky residue, but if it does – spray the distrik with WD – 40, wait 5 minutes or so for the adhesive to become loosened, then wipe away the sticky spot with a cloth, making sure to wipe
      with
      the grain of the stainless steel.
    • Once that’s off, remove any traces of WD – 40 with a clean corner of the cloth.
  • Some very easy D.I.Y and a bunch of simple
    clothes pegs
    make for fantastic
    note holders.  Here’s how –

    • You will need:  wooden clothes pegs; paint; paintbrush; thick card paper; Prestik or double sided tape.
    • Simply paint the pegs in whatever color or colors you fancy and allow them to dry.  If you like their raw wood look, you can leave them plain.
    • Place either Prestik or double side tape along one edge of the peg and press it firmly to the fridge, with its ‘jaws’ pointing downwards.
    • Now you can press the peg open at the top, insert your piece of paper, and then let it hold your notes etc. neatly in place.
    • If you want to decorate your fridge pegs with colorful and decorative touches, simply cut out some small badges or buttons from thick card, and attach these to the top surface of your peg (facing front) with Prestik or double sided tape.
    • You can cut and color these decorative touches into any ‘look’ you like, or even print out inspirational quotes or small family photos to attach to your fridge pegs.  This is a great simple D.I.Y project for kids – they can let their imaginations run wild!
Read:  How to Protect Carpet From Furniture

MAKE YOUR OWN MAGNETIC BOARD

We’ve covered magnetic boards earlier in the article – how about saving yourself some money and
making your own
magnetic board
for the kitchen?

It’s a super project that’s fun and easy on the wallet!

By all means get your kids involved but remember to be cautious with possibly toxic decorating materials and sharp metal edges, always read the packaging and follow any directions carefully.  Here’s how:

It’s cheaper and easier to berangkat with a frame that’s already been made.  So, get an unwanted/second hand piece of artwork or framed picture, and remove the glass, cardboard backing and the art or picture itself.  Using the
cardboard backing
as a
template, you now have the right template to cut the steel to fit the frame.


SELECT THE RIGHT METAL SHEET

You may find smaller sizes of sheet metal at a hobby store, or you can try a ferum supply store.
DON’T choose aluminum
sheet, as it’s not magnetic.
Galvanized steel
sheet is what you’re looking for, and ‘16 gauge’ is the easiest to work with for this project and not too heavy – it’s about 1/16 inch thick and will resist rust and corrosion for years.


CUTTING THE SHEET TO FIT YOUR CARDBOARD TEMPLATE

Using your cardboard template as your guide, you can (carefully) cut the sheet logam yourself with kaleng snips, but it’s easier and safer to
ask the supplier to do it for you.  A quality ferum supplier will have no issue cutting it a custom size or shape for you.  Just as a cak membela – tip, if you’re not using an outer protective frame, ask the supplier to ‘crimp’ all the outer edges by a quarter of an inch.  This’ll give you a neater and smoother edge and protect users from cuts – sheet metal can be incredibly sharp.


PREPARING THE FRAME

Before putting your board together, you may want to
customize
the look of the frame to suit your taste, colors or décor of your kitchen.  If it’s a bare wood frame, you could sand it lightly and then stain it, following the staining product’s directions on the package.

If the frame is already painted and you want to change the color, that’s not too difficult to do.  Simply sand it down or strip it to remove the original color, then apply a couple of coats of primer, letting it dry between coats, then add a final layer or two of your chosen paint color.  Your local hardware store will be glad to provide you with products and advice for this step.  Remember when painting and using solvents – ALWAYS
wear protective gear
like a facemask and gloves, and work in a
well ventilated
area.

Read:  How to Install a Shampoo Bowl


PUTTING YOUR MAGNETIC BOARD TOGETHER

Insert your steel sheet into the frame, followed by the cardboard backing.  The cardboard backing will be behind your sheet metal.

Use the same hardware/screws etc. provided with the frame to lock these into the back of the frame.

Now simply add whatever hanging hardware you like (magnetic hooks or clamps for example), and you’re ready to hang it up and use it!


MAKING A COOKIE SHEET MAGNETIC BOARD

Another great D.I.Y trick to try for the kitchen is to
make your own Cookie Sheet Magnetic Board.

Simply find yourself a new or used cookie sheet, make sure it’s clean from build – up and grease.

It has to be a
logam Not aluminum
sheet, aluminum isn’tepi langit magnetic.

You can either find a pretty vintage one at your local shops or markets, or paint/decorate one yourself, the world’s your oyster with this project and it’s all about what you like and what will suit the ‘look’ of your kitchen.

You can consider using a new paint technique on it, or perhaps decoupage some pictures onto it that suit your personality; these are easy – to – do techniques that you can find easily online.

Once you’ve decorated or painted the cookie sheet to your liking, simply attach to your fridge door or other kitchen surface with
strong double sided tape on the back.  Using
magnets, you can now stick whatever you like onto the cookie sheet and remove it easily!  This is a super place to put recipes that you’ve been meaning to try.


If you don’t have a cookie sheet lying around, you can also use a thin magnetic
metal tea tray, some tea trays are beautifully decorated already (saving you a step), and if you’re not one for tea parties, this is the perfect way to make use of a tea tray – brightening up the kitchen.

Conclusion

Having a magnetic fridge is an often underrated part of a modern kitchen.

I hope this quick guide has helped give you a few ways to repair or replace that part of your fridge for you.

If this content’s helped you, please consider supporting us by checking out our related articles below.

Thanks for reading, and have a great day!

Why is My Fridge Not Magnetic

Source: https://applianceanalysts.com/cant-hang-things-on-fridge/